Hello.
At start, the screen display is sometimes blank. Pivoting the screen flick the screen from normal to blank. Few seconds later, screen is stable and normal.
Normally, it is a common problem in notebook with pivotal screen. The risk is to progressively break the video cable between the motherboard and the screen.
Do you have any advice or preventing answer? The hinge is not an easy part to open...
Screen display blank
Re: Screen display blank
Hi !
I had this same problem, the samsung hotline told me it's a known problem of the video cable on some series, and the warranty service changed it. Contact them !
I had this same problem, the samsung hotline told me it's a known problem of the video cable on some series, and the warranty service changed it. Contact them !
Re: Screen display blank
My NC10 is normally too old and out of the warranty period. Anyway I will try to contact them...
Re: Screen display blank
Hello,
Suppose to be of interest to :
- I needed to open my NC10 to install a SSD.
- I have voluntary slightly moved the video cables so that there are less tensions to the welds.
- Apparently none problem now...
=> So, if you are out of warranty, or have to open you netbook, you know you eventually have a very simple tip to try to resolve the problem.
Suppose to be of interest to :
- I needed to open my NC10 to install a SSD.
- I have voluntary slightly moved the video cables so that there are less tensions to the welds.
- Apparently none problem now...
=> So, if you are out of warranty, or have to open you netbook, you know you eventually have a very simple tip to try to resolve the problem.