Last visit was: It is currently 21/10/2014, 4:48


All times are UTC [ DST ]




Post new topic Reply to topic  [ 148 posts ]  Go to page 1, 2, 3, 4, 5 ... 10  Next
Author Message
 Post subject: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04
PostPosted: 29/10/2009, 11:20 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
  • Repository URL: https://launchpad.net/~voria/+archive/ppa
  • Instructions:
    • Add the repository to the sources list and enable it
      Open a terminal and use the following command:
      Code:
      sudo add-apt-repository ppa:voria/ppa
    • Perform a complete system update
      From the terminal, use the following command in order to update all the packages at the latest versions:
      Code:
      sudo apt-get update && sudo apt-get upgrade
    • Install the important packages
      Use your favourite package manager to install the following packages:
      • samsung-backlight
        Enable the screen backlight support for notebooks/netbooks that don't have a proper support (mostly with Intel video cards).
        On Samsung NC10 it's not needed if you are using BIOS 11CA.
      • nvidia-bl-dkms (only for K/Ubuntu 10.04 - Lucid Lynx)
        Enable the screen backlight support for notebooks/netbooks shipped with nvidia video cards.
        After the installation, open the file '/etc/modules' in a text editor and add the line nvidia_bl.
      • samsung-wireless
        Enable the wireless card, on netbooks shipped with a Realtek card.
      • samsung-scripts (only for K/Ubuntu 9.10 - Karmic Koala)
        Enable the FN keys (more info and instructions on how to enable and use them here).
      • samsung-tools (only for K/Ubuntu 10.04 - Lucid Lynx)
        Enable full control and configuration of all devices (bluetooth, webcam, wireless, CPU fan, FN keys).
    • Reboot the system to have all changes applied.
    • Have fun! ;)

NOTE FOR KARMIC TO LUCID UPGRADE:
If you have previously installed the packages 'samsung-backlight' and 'easy-slow-down-manager' in karmic, you need to reinstall them in lucid, or else they will not work. Remove the old ones:
Code:
sudo apt-get purge samsung-backlight-* easy-slow-down-manager-*
and install the new versions:
Code:
sudo apt-get install samsung-backlight easy-slow-down-manager
Also, remove the old 'samsung-scripts' package if it's still installed, in order to avoid conflicts with the new 'samsung-tools'.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 31/10/2009, 12:36 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
A little note for the Ubuntu users who are considering to upgrade to karmic and need VGA output: it does not work well yet. When trying to switch monitors, image freezes on both the internal and external screens. I will investigate the problem.

Instead, on Kubuntu everything works perfectly, by using the 'krandrtray' utility.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 01/11/2009, 11:04 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
After some tests, it seems the screens' freeze only happens when compiz in enabled.
So, a simple workaround for now is to disable it when VGA output is needed, and everything will work perfectly.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 02/11/2009, 12:15 
Newbie
Newbie

Joined: 13/06/2009, 15:40
Posts: 8
This is bug 419328, also raised upstream at Freedesktop.org

https://bugs.launchpad.net/bugs/419328


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 04/11/2009, 20:12 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
Yes, I'm following it, hoping in a fast solution. :)

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 12/11/2009, 10:57 
Newbie
Newbie

Joined: 12/11/2009, 10:47
Posts: 4
Hello,

First of all thank you very much for the great job you are doing for Ubuntu and NC10 :)

I install NC-10 Backlight but i still can't change the brightness using Fn+arrow up/down.

I'm using Ubuntu Karmic 9.10 on Samsung NC10. I have Bios 04CA.
I am afraid to update Bios. I read the How too and did not understand it :(

Therefore I prefer the solution with your NC-10 Backlight.

Any Idea to fix the problem ?


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 12/11/2009, 11:34 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
What kernel are you using?
The current nc10-backlight is for kernel 2.6.31-14 available on main ubuntu repos. Proposed repos have the new 2.6.31-15, but I don't provide updates for proposed packages anymore.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 12/11/2009, 12:07 
Newbie
Newbie

Joined: 12/11/2009, 10:47
Posts: 4
Right :P

I don't know how it happened but I have the Kernel 2.6.31-15 :-\

I re-start my NC10 and choosed 2.6.31-14 in the Grub and the Brightness adjustment worked fine!

I tried to get rid off 2.6.31-15 using Synaptic to delete it. But when I restart the computer it logged in using it again ?

How can I suppress this 2.6.31-15 ?


Last edited by Nemorox on 12/11/2009, 13:26, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 12/11/2009, 13:24 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
To disable proposed updates, go to 'System'->'Administration'->'Software Sources', then in 'Updates' tab and disable 'karmic-proposed'.

To remove the 2.6.31-15 kernel, open the package manager, search for '2.6.31-15' and remove any package found.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 12/11/2009, 13:32 
Newbie
Newbie

Joined: 12/11/2009, 10:47
Posts: 4
It worked ;)

Thanks !!


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 29/11/2009, 23:06 
Newbie
Newbie

Joined: 29/11/2009, 23:02
Posts: 2
hi,

first, thanks for this wonderful scripts...but i have one problem.

i add the source like your manual above, but i`m getting the following error message:

Quote:
W: GPG error: http://ppa.launchpad.net karmic Release: The following signatures were invalid: BADSIG 36960FC31E5F36F0 Launchpad PPA for Fortunato Ventre


what is wrong??? what can i do?

thx for hlp. greetings from germany.


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 30/11/2009, 0:04 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
Install the GPG key with the command
Code:
sudo apt-get install --allow-unauthenticated voria-ppa-keyring
then reload the sources list
Code:
sudo apt-get update

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 30/11/2009, 0:15 
Newbie
Newbie

Joined: 29/11/2009, 23:02
Posts: 2
hey,

after executing

Code:
sudo apt-get install --allow-unauthenticated voria-ppa-keyring


i got this message:

Quote:
voria-ppa-keyring is the newest version.


and after

Quote:
sudo apt-get update


is still got

Quote:
OK http://packages.medibuntu.org karmic Release.gpg
Ign http://packages.medibuntu.org karmic/free Translation-de
Ign http://packages.medibuntu.org karmic/non-free Translation-de
OK http://packages.medibuntu.org karmic Release
OK http://packages.medibuntu.org karmic/free Packages
OK http://packages.medibuntu.org karmic/non-free Packages
Es wurden 308B in 6s geholt (47B/s)
Paketlisten werden gelesen... Fertig
W: GPG error: http://ppa.launchpad.net karmic Release: The following signatures were invalid: BADSIG 36960FC31E5F36F0 Launchpad PPA for Fortunato Ventre


:(


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 30/11/2009, 0:21 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
Mmm, that's really odd.
Maybe something went wrong during GPG key installation?
Please try to reinstall it with this command:
Code:
sudo apt-get install --reinstall --allow-unauthenticated voria-ppa-keyring
If everything goes well you'll see an 'OK' at the end of the command's output.
Then, reload the sources list with
Code:
sudo apt-get update

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: Use the repository on K/Ubuntu 9.10 (Karmic Koala)
PostPosted: 19/12/2009, 17:46 
Newbie
Newbie

Joined: 19/12/2009, 17:35
Posts: 3
Great! You're repo rock. About the backlight though, I can change the backlight now with the nc10-backlight package, but it don't have as many steps as before. It doesn't go really dark, like it used to do in jaunty, when brightness is set at the bottom. Is it suppose to be like that or is something wrong?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 148 posts ]  Go to page 1, 2, 3, 4, 5 ... 10  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net & kodeki