Page 1 of 1
BIOS Update
Posted: 02 May 2009, 01:38
by summel
Anyone got a solution for the BIOS Updates? I just going to try updating via wine :O
(Ok, wine doesnt work.... updater complains about missing battery/AC :/ )
RE: BIOS Update
Posted: 02 May 2009, 05:54
by Cezary
RE: BIOS Update
Posted: 02 May 2009, 11:29
by Coatezy
Hi, Just wondering what fixes are in the bios update and what are the advantages?!? :-/
RE: BIOS Update
Posted: 03 May 2009, 23:07
by Maike05
May it fix my wifi issue ?
RE: BIOS Update
Posted: 04 May 2009, 00:15
by summel
'Maike05' pid='960' dateline='1241388459' wrote:
May it fix my wifi issue ?
Seems so...
i sometimes had to reboot my archlinux when using WPA2 enterprise... now it seems to work
To bad the latest update is Windows only so far :/
RE: BIOS Update
Posted: 04 May 2009, 19:25
by voria
I've extracted the BIOS from my NC10 using the
flashrom utility, which seems to correctly detect and work with the NC10 BIOS chip (the 'nopat' option on the kernel command line on boot is required to make it work). You can find it
here.
It's very likely that it can be flashed with the same utility, however I did not test it (I had no need to do it).
If anyone wants to try, keep in mind that
it's risky and
it can brick the NC10. I'm not responsible of the results.
RE: BIOS Update
Posted: 04 May 2009, 19:47
by voria
I was thinking that it would be nice to have all the other BIOS versions available for use with flashrom.
This way, it would be possible to roll back to an older BIOS version, if needed. At the moment this is not possible using the official windows flashing utility.
For extracting the bios, simply install the needed package
reboot the system with the option 'nopat' on the kernel command line, then use the command
to extract the BIOS and save it as 'backup.bin' (well, use a more appropriate name).
Then, post it here.