Last visit was: It is currently 23/07/2014, 2:12


All times are UTC [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Adjusting brightness on NC20
PostPosted: 27/09/2010, 12:22 
Newbie
Newbie

Joined: 27/09/2010, 11:44
Posts: 2
Hi,
Have been looking all through the forum for last 3 days (currently no internet in my apartment - spending 3 hours a day in starbucks :() trying to figure out how to get the FN-up and FN-down keys to work adjusting my backlight. Just found a thread where someone was asked to post the results of
Code:
lspci -nn
sudo dmidecode -s system-product-name
so that a fix could be made for this problem on their specific model. So here are my results:

Code:
lspci -nn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VX800 Host Bridge [1106:0353] (rev 12)
00:00.1 Host bridge [0600]: VIA Technologies, Inc. VX800/VX820 Error Reporting [1106:1353]
00:00.2 Host bridge [0600]: VIA Technologies, Inc. VX800/VX820 Host Bus Control [1106:2353]
00:00.3 Host bridge [0600]: VIA Technologies, Inc. VX800 PCI to PCI Bridge [1106:3353]
00:00.4 Host bridge [0600]: VIA Technologies, Inc. VX800/VX820 Power Management Control [1106:4353]
00:00.5 PIC [0800]: VIA Technologies, Inc. VX800/VX820 APIC and Central Traffic Control [1106:5353]
00:00.6 Host bridge [0600]: VIA Technologies, Inc. VX800/VX820 Scratch Registers [1106:6353]
00:00.7 Host bridge [0600]: VIA Technologies, Inc. VX800/VX820 North-South Module Interface Control [1106:7353]
00:01.0 VGA compatible controller [0300]: VIA Technologies, Inc. VX800/VX820 Chrome 9 HC3 Integrated Graphics [1106:1122] (rev 11)
00:03.0 PCI bridge [0604]: VIA Technologies, Inc. VX800/VX820 PCI Express Root Port [1106:e353]
00:03.1 PCI bridge [0604]: VIA Technologies, Inc. VX800/VX820 PCI Express Root Port [1106:f353]
00:0d.0 FLASH memory [0501]: VIA Technologies, Inc. Secure Digital Memory Card Controller [1106:9530]
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VX800 Serial ATA and EIDE Controller [1106:5324]
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0)
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0)
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0)
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 90)
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VX800/VX820 Bus Control and Power Management [1106:8353]
00:11.7 Host bridge [0600]: VIA Technologies, Inc. VX8xx South-North Module Interface Control [1106:a353]
00:14.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 20)
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 13)

and
Code:
sudo dmidecode -s system-product-name
NC20/NB20


Any help greatly appreciated - I am getting sick of having to adjust my brightness in BIOS and then sticking with it until my next restart!

Thanks.


Top
 Profile  
 
 Post subject: Re: Adjusting brightness on NC20
PostPosted: 28/09/2010, 10:38 
Newbie
Newbie

Joined: 27/09/2010, 11:44
Posts: 2
Never mind, working after a full upgrade - thought I did this yesterday but apparently something went wrong. The only remaining problem is that the backlight occasionally starts rapidly switching between the 1st and 2nd brightness settings until another hotkey is pressed (e.g. volume up). This seems to happen soon after start-up but has also happened during a session. Anyone else had this problem? Thanks.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net & kodeki