Hi,
My brightnesscontrolkeys dont work with samsung-tools other hotkeys works fine for me..
acpi is installed...
i can change the brightness with : setpci -s 00:02.0 f4.b=ff
but the hotkeys will not work ....
Also Samsung-backlight is supportet
# dmesg | grep Samsung
Samsung-backlight: checking for SABI support.
Samsung-backlight: SABI is supported (f51fb)
xev has this output if i press fn+up/down:
KeyRelease event, serial 39, synthetic NO, window 0x1000001,
root 0xaa, subw 0x0, time 8861190, (169,-8), root:(315,13),
state 0x0, keycode 233 (keysym 0x1008ff02, XF86MonBrightnessUp), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 39, synthetic NO, window 0x1000001,
root 0xaa, subw 0x0, time 8861797, (169,-8), root:(315,13),
state 0x0, keycode 232 (keysym 0x1008ff03, XF86MonBrightnessDown), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
I think its a problem of xbindkeys but i have no idea....
can anyone help me? if the hotkeys for brightness will work i could finally use archlinux
Regards,
greeny
Backlightcontrol on Samsung N210/N220 Archlinux dont work
Re: Backlightcontrol on Samsung N210/N220 Archlinux dont wo
Hey, i have done it with:
in .xbindkeysrc
then run:
xbindkeys
and have fun^^
Code: Select all
"amixer sset Master 2+ &"
m:0x0 + c:176
"amixer sset Master 2- &"
m:0x0 + c:174
#"amixer sset Master 0 &"
"amixer sset Master toggle &"
m:0x0 + c:160
#"sudo pm-suspend"
# m:0x0 + c:223
"xbacklight +20"
m:0x0 + c:233
"xbacklight -10"
m:0x0 + c:232
then run:
xbindkeys
and have fun^^