Last visit was: It is currently 20/10/2014, 23:51


All times are UTC [ DST ]




Post new topic Reply to topic  [ 82 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next
Author Message
 Post subject: RE: [NC10] New scripts, updated scripts and a general summary
PostPosted: 11/05/2009, 20:18 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
Thank you, I've updated the 'nc10-scripts' package on the repository. :)

About the locales, I have modified all the scripts to just check "fr" instead of "fr_FR", and I did it for all the other locales.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: RE: [NC10] New scripts, updated scripts and a general summary
PostPosted: 11/05/2009, 23:06 
Newbie
Newbie

Joined: 23/04/2009, 11:18
Posts: 31
Turkish translation of cpumanager_helper.py . If the governer modes can translatable, it would be more understandable. Thanks for the development.

Code:
elif language == "tr":
    popup_title = "İşlemci"
    cpu_temp = "Sıcaklık: "
    cpu_freq = "Hız: "
    cpu_governor = "Yönetim: "


Last edited by mbt28 on 11/05/2009, 23:07, edited 1 time in total.

Top
 Profile  
 
 Post subject: RE: [NC10] New scripts, updated scripts and a general summary
PostPosted: 12/05/2009, 10:56 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
New 'nc10-scripts' on repository, changelog:
Code:
nc10-scripts (0.4~ppa5~nc10~jaunty) jaunty; urgency=low

  * 'cpumanager.sh':
    - Added the 'IGNORE_GOVERNORS' variable. It's a list of governors
      we don't want to use.
    - Added 'conservative' to IGNORE_GOVERNORS.
  * 'cpumanager_helper.py':
    - Added Turkish translation. (thanks to mbt28)
    - Updated French translation.
    - Added new translatable strings:
        governor_powersave
        governor_ondemand
        governor_conservative
        governor_performance
      They default to 'None' (the original name of the governor is used).

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: RE: [NC10] New scripts, updated scripts and a general summary
PostPosted: 12/05/2009, 15:37 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
Yet another update:
Code:
nc10-scripts (0.4~ppa6~nc10~jaunty) jaunty; urgency=low

  * Added support to all the governors to 'cpumanager*' scripts.


These are all the translatable strings for all the governors in 'cpumanager_helper.py':
governor_powersave
governor_ondemand
governor_conservative
governor_performance
governor_userspace

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: RE: [NC10] New scripts, updated scripts and a general summary
PostPosted: 12/05/2009, 19:36 
Newbie
Newbie

Joined: 23/04/2009, 11:18
Posts: 31
Added govermod translations to TR.

Code:
elif language == "tr":
    popup_title = "İşlemci"
    cpu_temp = "Sıcaklık: "
    cpu_freq = "Hız: "
    cpu_governor = "Yönetim: "
    governor_powersave = "güç tasarrufu"
    governor_ondemand = "talep üzerine"
    governor_conservative = "tutumlu"
    governor_performance = "tam güç"
    governor_userspace = "kullanıcı tanımlı"


Top
 Profile  
 
 Post subject: RE: [NC10] New scripts, updated scripts and a general summar
PostPosted: 12/05/2009, 22:00 
Newbie
Newbie

Joined: 13/03/2009, 17:01
Posts: 12
voRia wrote:
Thanks, Cezary. :)

I've added the cpu frequency too.

Is "Częstotliwość:" a good polish translation for "Frequency:"? I asked google and it says so :P


yes, exactly.


Top
 Profile  
 
 Post subject: RE: [NC10] New scripts, updated scripts and a general summary
PostPosted: 13/06/2009, 15:56 
Newbie
Newbie

Joined: 13/06/2009, 15:40
Posts: 8
Thanks for all the work on the scripts, really rounds out the experience of using the UNR on the N110.

I have one little suggestion. Powertop shows the bluetooth module as still active after disabling the bluetooth with '/etc/init.d/bluetooth stop', adding an additional 'rmmod btusb' and a corresponding 'modprobe btusb' before start in the /usr/bin/btonoff.sh script seems to complete the disabling.

Mark.


Last edited by marks on 13/06/2009, 15:59, edited 1 time in total.

Top
 Profile  
 
 Post subject: RE: [NC10] New scripts, updated scripts and a general summar
PostPosted: 16/06/2009, 19:24 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
marks wrote:
I have one little suggestion. Powertop shows the bluetooth module as still active after disabling the bluetooth with '/etc/init.d/bluetooth stop', adding an additional 'rmmod btusb' and a corresponding 'modprobe btusb' before start in the /usr/bin/btonoff.sh script seems to complete the disabling.


I'm not sure that removing 'btusb' module is really needed in order to completely disable bluetooth. Just stopping the bluetooth service seems to kill the bluetooth radio too.
Anyway, I don't see any problem in removing the module too, so I have modified the script as you suggested. :)

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: RE: [NC10] New scripts, updated scripts and a general summary
PostPosted: 17/06/2009, 14:14 
Newbie
Newbie

Joined: 13/06/2009, 15:40
Posts: 8
I suspect that you're correct and the bluetooth radio is turned off, however leaving the kernel module in seems to cause the module to keep waking the CPU up from sleep states, which is what PowerTop is picking up.

As you say, removing the module isn't going to hurt.


Top
 Profile  
 
 Post subject: RE: [NC10] New scripts, updated scripts and a general summary
PostPosted: 26/06/2009, 14:57 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
Scripts have been completely rearranged and reorganized.
I've updated the main post with informations on how they work now.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: [NC10] New scripts, updated scripts and a general summary
PostPosted: 05/10/2009, 19:09 
Newbie
Newbie

Joined: 05/10/2009, 15:26
Posts: 5
I installed the nc10-scripts package in Xubuntu 9.10 (karmic) and it took me a while to note that nc10 is the command to use as there was no hint in the package description. I use neither compiz nor metacity, but I can enable the keybindings manually in Keyboard settings of Xfce desktop environment.

I can't enable bluetooth: the command gives "Can't init device hci0: Unknown error 132 (132)". I have used blueman-applet (that displays status in its tray icon) but even that can not turn bluetooth on now. Strange, it used to work before. Maybe updates broke my bluetooth :(

By the way, I would be interested in some applet that would display status of webcam in panel.

As for the main post, in my experience "nc10 lcd" needs sudo, but "nc10 cpuperf auto" does not.


Top
 Profile  
 
 Post subject: Re: [NC10] New scripts, updated scripts and a general summary
PostPosted: 05/10/2009, 20:14 
Newbie
Newbie

Joined: 05/10/2009, 15:26
Posts: 5
As for the bluetooth toggle, it works after suspend to RAM & resume.


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 04/11/2009, 15:16 
Newbie
Newbie

Joined: 04/11/2009, 15:14
Posts: 3
I have just done a complete fresh install of Ubuntu 9.10 Netbook Remix on a Samsung n310. Everything is working well except the function keys. I then installed NC-10 Script and Backlight packages as per instructions on this website. Everything works well on the command line in a terminal BUT not via the Fn keys.

What should I do next to bind the Fn key combos to the commands ?

Many thanks in advance of any help,

Cheers, Shaun.


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 04/11/2009, 20:03 
Newbie
Newbie

Joined: 05/10/2009, 15:26
Posts: 5
It depends what desktop environment you are using. In Xfce you can do it easily in keyboard settings.


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 04/11/2009, 20:38 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
On ubuntu karmic normal version, the 'Commands' compiz plugin needed to use hotkeys is enabled by default. I don't know if it's the same for the netbook remix.
Just check it: install the 'compizconfig-settings-manager' package, start it and make sure the 'Commands' plugin is enabled.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 82 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net & kodeki