[NC10] Kernel 2.6.31

Discussioni riguardanti l'installazione e la configurazione di Linux sui laptop Samsung
Post Reply
a.sabetta
Newbie
Newbie
Posts: 4
Joined: 20 Jun 2009, 08:58

RE: [NC10] Kernel 2.6.30* e altro

Post by a.sabetta »

'okon3' pid='1519' dateline='1246379166' wrote: da me è su Always On
Appunto. Ora mi piacerebbe capire come mai se e' off, il driver non riesce a funzionare. E' un difetto noto?

EDIT: mi sono accorto che questa cosa e' gia' stata menzionata da voRia in un thread del forum in inglese....
Last edited by a.sabetta on 30 Jun 2009, 17:46, edited 1 time in total.
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.30* e altro

Post by voria »

Eh si, purtroppo se la scheda è spenta all'avvio dell'NC10, poi risulta impossibile riaccenderla.
La soluzione è impostare nel BIOS il wireless su "Always On".
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.31

Post by voria »

Aggiornato il kernel sul repository alla versione 2.6.31-3, e il post principale di questo thread con le istruzioni per installarlo ed utilizzarlo.
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
ciccionamente
Newbie
Newbie
Posts: 13
Joined: 13 Jun 2009, 21:23

RE: [NC10] Kernel 2.6.31

Post by ciccionamente »

ho appena effettuato l'aggiornamento, la wireless e l'audio vanno benissimo, anzi, l'audio mi sembra anche più alto, ma forse sarà una mia impressione.

Ma ho sentito che con il kernel 31 sarebbe stato implementato anche il multitouch del Touchpad che se non mi sbaglio hanno anche gli nc10.

è vera la cosa?
e se è vera, come possiamo configurarlo?

Grazie
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.31

Post by voria »

Personalmente non ho notato differenze per quanto riguarda il multitouch.
Anzi, ormai sono convinto che il touchpad dell'NC10 non sia un vero multitouch, credo che sotto windows la funzionalità sia in qualche modo solo emulata.
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
User avatar
Cimi
Jr. Member
Jr. Member
Posts: 95
Joined: 23 Apr 2009, 18:22
Location: Padova, Italy
Contact:
Contact Cimi

RE: [NC10] Kernel 2.6.31

Post by Cimi »

su osx c'è lo scrolling con più dita che è stracomodo
Top
User avatar
thunder71
Jr. Member
Jr. Member
Posts: 71
Joined: 13 Feb 2009, 18:06

RE: [NC10] Kernel 2.6.31

Post by thunder71 »

non so se su ubuntu funziona, io uso fedora.. e non so se potrà portare dei termini di convenienza con l'NC10, comunque provate ad usare il comando xinput (che su fedora gestisce cose carucce come anche il touchpad) io da li son riuscito ad avere l'emulazione come nel MAC, quindi con 2 dita.

Code: Select all

xinput(1)                                                            xinput(1)



NAME
       xinput - utility to configure and test XInput devices


SYNOPSIS
       xinput  [version]  [list [device_name]] [set-pointer device_name] [get-
       feedbacks device_name] [set-mode device_name  ABSOLUTE|RELATIVE]  [set-
       ptr-feedback  device_name  threshold  num  denom] [set-integer-feedback
       device_name index value] [set-button-map device_name map button 1  [map
       button   2   [...]]]    [query-state  device_name]  [test  [-proximity]
       device_name]


DESCRIPTION
       xinput version
               test if the XInput extension is available and return  the  ver-
               sion number of the program.


       xinput list [device_name]
               If  no argument is given list all the input devices showing all
               their features. If an argument is given, show all  the  feature
               of device_name.  Uses XListInputDevices(3).


       xinput get-feedbacks device_name
               Display  the  feedbacks  of  device_name. Uses XGetFeedbackCon-
               trol(3).


       xinput set-pointer device_name
               Switch device_name  in  core  pointer.  Uses  XChangePointerDe-
               vice(3).


       xinput set-mode device_name ABSOLUTE|RELATIVE
               Change the mode of device_name. Uses XSetDeviceMode(3).


       xinput set-ptr-feedback device_name threshold num denom
               Change  the  acceleration of device_name. Uses XChangeFeedback-
               Control(3).


       xinput set-integer-feedback device_name index value
               Change the value of an integer feedback  of  device_name.  Uses
               XChangeFeedbackControl(3).


       xinput set-button-map device_name map button 1 [map button 2 [...]]
               Change  the  button mapping of device_name. Uses XSetDeviceBut-
               tonMapping(3).


       xinput query-state device_name
               Query the device state. Uses XQueryDeviceState(3).


       xinput test [-proximity] device_name
               Register all extended events from device_name and enter an end-
               less  loop  displaying  events  received.  If the -proximity is
               given, ProximityIn and ProximityOut are registered.

       device_name can be the device name as  a  string  or  the  XID  of  the
       device.



COPYRIGHT
       Copyright 1996,1997, Frederic Lepied.

       Copyright 2008, Philip Langdale.


AUTHOR
       Philip Langdale, <philipl@alumni.utexas.net>
       Frederic Lepied, France <Frederic.Lepied@sugix.frmug.org>

       Patches, bug reports, and suggestions are welcome.



Frederic Lepied          $Date: 1997/06/09 16:06:31 $                xinput(1)
altro esempio, questo l'ho dato sul pc di casa, è ovvio che non ci sia la funzione del touchpad, però giusto per capirsi...

Code: Select all

xinput list
"Virtual core keyboard"	id=0	[XKeyboard]
	Num_keys is 248
	Min_keycode is 8
	Max_keycode is 255
"Virtual core pointer"	id=1	[XPointer]
	Num_buttons is 32
	Num_axes is 2
	Mode is Relative
	Motion_buffer is 256
	Axis 0 :
		Min_value is 0
		Max_value is -1
		Resolution is 0
	Axis 1 :
		Min_value is 0
		Max_value is -1
		Resolution is 0
"Logitech G9 Laser Mouse"	id=2	[XExtensionKeyboard]
	Num_keys is 248
	Min_keycode is 8
	Max_keycode is 255
	Num_buttons is 32
"Logitech BT Mini-Receiver"	id=3	[XExtensionKeyboard]
	Num_keys is 248
	Min_keycode is 8
	Max_keycode is 255
	Num_buttons is 32
	Num_axes is 2
	Mode is Relative
	Motion_buffer is 256
	Axis 0 :
		Min_value is -1
		Max_value is -1
		Resolution is 1
	Axis 1 :
		Min_value is -1
		Max_value is -1
		Resolution is 1
"Power Button (FF)"	id=4	[XExtensionKeyboard]
	Num_keys is 248
	Min_keycode is 8
	Max_keycode is 255
"Power Button (CM)"	id=5	[XExtensionKeyboard]
	Num_keys is 248
	Min_keycode is 8
	Max_keycode is 255
"Logitech BT Mini-Receiver"	id=6	[XExtensionKeyboard]
	Num_keys is 248
	Min_keycode is 8
	Max_keycode is 255
"Dell Dell USB Keyboard"	id=7	[XExtensionKeyboard]
	Num_keys is 248
	Min_keycode is 8
	Max_keycode is 255
"Dell Dell USB Keyboard"	id=8	[XExtensionKeyboard]
	Num_keys is 248
	Min_keycode is 8
	Max_keycode is 255
"Macintosh mouse button emulation"	id=9	[XExtensionPointer]
	Num_buttons is 32
	Num_axes is 2
	Mode is Relative
	Motion_buffer is 256
	Axis 0 :
		Min_value is -1
		Max_value is -1
		Resolution is 1
	Axis 1 :
		Min_value is -1
		Max_value is -1
		Resolution is 1
"Logitech G9 Laser Mouse"	id=10	[XExtensionPointer]
	Num_buttons is 32
	Num_axes is 2
	Mode is Relative
	Motion_buffer is 256
	Axis 0 :
		Min_value is -1
		Max_value is -1
		Resolution is 1
	Axis 1 :
		Min_value is -1
		Max_value is -1
		Resolution is 1
sicuramente qualche smanettone come il Dott. Voria saprà districarsi meglio con ste cose :P
"Guerra preventiva", "Pacificatori"... Ma stiamo scherzando? Ma quando dici che un mitragliere su un elicottero è un costruttore di pace, io divento pazzo. Perché non ho più le parole per definire Emergency." (Beppe Grillo)
[/size]
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.31

Post by voria »

Nuovo kernel 2.6.31-4 sul repository (basato sul kernel vanilla 2.6.31-rc4).
Nota: il problema con la webcam è ancora presente.
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.31

Post by voria »

Un altro aggiornamento del kernel sul repository, che risolve il problema con la webcam:

Code: Select all

linux (2.6.31-4.22~ppa2~nc10~jaunty) jaunty; urgency=low

  [ Fortunato Ventre ]

  * PPA upload for Jaunty.
  * Use i915.modeset=0 as default.
  * Enable ath5k on lpia.
  * Fix webcam support.
...
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.31

Post by voria »

Nuovo kernel sul repository, versione 2.6.31-5 (basato su kernel vanilla 2.6.31-rc5).
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.31

Post by voria »

Aggiornato il post principale.
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.31

Post by voria »

Nuovo kernel 2.6.31-6 disponibile.
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.31

Post by voria »

Kernel aggiornato alla versione 2.6.31-7.
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.31

Post by voria »

Sembra ci sia un problema durante lo spegnimento del pc con l'ultimo kernel 2.6.31-7.
Consiglio di continuare ad utilizzare la versione 2.6.31-6, in attesa di una soluzione al problema.
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
User avatar
voria
Administrator
Administrator
Posts: 1383
Joined: 12 Feb 2009, 18:08
Location: Italy
Contact:
Contact voria

RE: [NC10] Kernel 2.6.31

Post by voria »

Kernel 2.6.31-7 rimosso dal repository, kernel 2.6.31-6 aggiornato all'ultima versione disponibile per karmic.
Image
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!
Top
Post Reply

Return to “Linux On My Samsung”