Last visit was: It is currently 02/10/2014, 9:26


All times are UTC [ DST ]




Post new topic Reply to topic  [ 82 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next
Author Message
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 10/11/2009, 15:33 
Newbie
Newbie

Joined: 04/11/2009, 15:14
Posts: 3
Update:

Managed to get all the function keys working on the n310 by

1) Install 2.6.32 kernal then add the following line to /etc/rc.local
echo 130,131,132,134,136,137,177,179,247,249 > /sys/devices/platform/i8042/serio0/force_release

This forces the missing Fn key to produce key_release events. (I believe the 11 bios fixes this for NC10 but the same bios is not available for N310)

2) Then I edited /lib/udev/rules.d/95-keymap.rules and after the 'LABEL="keyboard_vendorcheck"' section I added |*N310*| to the Samsung vendor line that already contained |*NC10*| and |*NC20*|

3) Installed the NC-10 scripts detailed in this topic.

4) Installed CompizConfig and enabled the commands applet

5) Configured Fn+key keybindings to the NC-10 script commands

Now ALL MY FN BUTTONS WORK!!!!!

Thanks, Shaun.

ALL MY FUNCTION KEYS ARE NOW WORKING!!!!


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 11/11/2009, 20:49 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
New 'nc10-scripts' on repository. :)

There are interesting additions this time: now all the customizable options have been moved in '/etc/default/nc10-scripts', so there is no need to manually edit the scripts anymore. For instance, if your wireless card uses a different kernel module, just set it in the configuration file.
Also, there is a new option now, LAST_STATUS_RESTORE which, if enabled, it restores the current status for all devices after a system suspend/hibernate/reboot cycle. This means that if you disable the bluetooth and then shutdown the pc, the bluetooth will be already off at the next boot.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 17/11/2009, 12:59 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
New version on repository. Changelog:
Code:
nc10-scripts (4.0~ppa3~nc10~karmic) karmic; urgency=low

  * Keep devices status between package updates.
  * Add a new command, 'nc10 status', to show all devices status.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 23/11/2009, 11:17 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
New version on repository. Changelog:
Code:
nc10-scripts (4.0~ppa4~nc10~karmic) karmic; urgency=low

  * Make the scripts work in gdm login window too.
  * Add new options in /etc/default/nc10-scripts to control devices
    autosuspend.
  * Set webcam and bluetooth autosuspend to auto when enabling them.
  * Set default values for all options in /usr/lib/nc10 if configuration
    file cannot be found.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 23/11/2009, 20:37 
Newbie
Newbie

Joined: 05/05/2009, 23:41
Posts: 15
Fn + up/down and scrolling area on touchpad don't work since today's updates (nc10-scripts, xorg-driver-synaptic and kernel)...


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 23/11/2009, 22:07 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
I've just uploaded the 'nc10-backlight' for the new kernel on the repo, it will be available in a few hours.

Concerning the touchpad, go on 'System'->'Preferences'->'Mouse' and enable scrolling (it's not enabled anymore by default).

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 24/11/2009, 0:29 
Newbie
Newbie

Joined: 05/05/2009, 23:41
Posts: 15
Many thanks !!! ;)


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 25/11/2009, 15:56 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
New version on repository. Changelog:
Code:
nc10-scripts (4.0~ppa5~nc10~karmic) karmic; urgency=low

  * Use iwconfig commands to toggle wireless rfkill, instead
    of module removal.
  * Webcam and bluetooth kernel modules are always the same,
    so there is no need for options in /etc/default/nc10-scripts.
  * Add bash-completion support for all the scripts.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 29/11/2009, 15:38 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
New version on repository. Changelog:
Code:
nc10-scripts (4.0~ppa6~nc10~karmic) karmic; urgency=low

  * Add back the module removal method for toggling wireless,
    along with the new iwconfig method.
  * Add a new option in '/etc/default/nc10-scripts' to select
    which method to use.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 30/11/2009, 14:32 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
New version. Changelog:
Code:
nc10-scripts (5.0~ppa1~nc10~karmic) karmic; urgency=low

  * Migrate to debhelper build system.
Using debhelper for package building, any change done by the user in the configuration file (/etc/default/nc10-scripts) is preserved between package updates.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 30/11/2009, 14:41 
Newbie
Newbie

Joined: 29/11/2009, 14:10
Posts: 29
voRia wrote:
New version. Changelog:
Using debhelper for package building, any change done by the user in the configuration file (/etc/default/nc10-scripts) is preserved between package updates.


Ah, that's cool, I had been thinking of asking you about that :)

Matt


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 12/12/2009, 18:39 
Newbie
Newbie

Joined: 12/12/2009, 18:37
Posts: 1
german translation cpuperf.sh:
Code:
   de*)
      popup_title="Prozessor"
      cpu_temp="Temperatur:"
      cpu_freq="Frequenz:"
      cpu_governor="Modus:"
      governor_powersave="Energie sparen"
      governor_ondemand="Auf Abruf"
      governor_conservative="Zurückhaltend"
      governor_performance="Leistung"
      governor_userspace="Benutzerdefiniert"
                ;;


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 12/12/2009, 20:19 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
Added. Thank you for the translation. :)

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 03/01/2010, 11:10 
Supporter
Supporter

Joined: 03/01/2010, 10:47
Posts: 9
Hi,
And first many thanks to you Voria ;) ! (I've done a little donation to proove I do appreciate your great work...)

I've activated your repository (for Karmic, since I use Ubuntu 9.10). nc10scripts work fine :-)

But you talk about "wmswitcher" and "hal-info" for example in other treads of this forum. I don't find them (I just see debhelper, nc10-backlight*, nc10-scripts, voria-ppa-keyring & xserver-xorg-input-synaptics ; only these last 3 are installed) in the repository list (menu System / Admin / Synaptic).

They seem to be available only in Jaunty version : on https://launchpad.net/~voria/+archive/ppa/+packages I see more packages for Jaunty than for Karmic, and I don't know how to get them.

Thank you !


Top
 Profile  
 
 Post subject: Re: HOWTO: NC10 scripts
PostPosted: 03/01/2010, 15:24 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
Welcome to the forum and thank you very much for the donation, it's really appreciated! :)

With Jaunty there were a lot of fixes needed to have everything working properly; fortunately most of them have been fixed by default with Karmic. This is the reason why on the repository there are a few packages for Karmic, compared to the number of packages for Jaunty.

jmg74fr wrote:
But you talk about "wmswitcher" and "hal-info" for example in other treads of this forum.

"hal-info" is not needed anymore, because the HAL subsystem is going to disappear in the future Ubuntu versions, and the process is already started with Karmic.
Concerning the "wmswitcher" script, I'm considering to re-add it to the 'nc10-scripts' package. After all, it's a script that can be useful from time to time.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 82 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net & kodeki