Last visit was: It is currently 22/12/2014, 20:55


All times are UTC [ DST ]




Post new topic Reply to topic  [ 24 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Problems with samsung-tools
PostPosted: 21/05/2010, 0:02 
Newbie
Newbie

Joined: 19/05/2010, 3:57
Posts: 3
voRia wrote:
It's the first time I see this error... and it should have nothing to do with "Samsung Tools".

Are you sure the hotkey you want to use for webcam is not already used by another application (which probably triggers that error)?


NOTHING was ordered to that key combination (Fn+F3). It was not the Samsung Tools' fault, but Samsung scripts'. :) Some hotkey definitions without ordered commands remained after I've upgraded from Karmic to Lucid and replaced the "Scripts" by the "Tools". I found them through gconfig-editor (eg. /apps/metacity/global_keybindings/run_command_5: <Alt>KP_Insert). After removing such empty hotkey definitions everything works fine as well as the rc.local line suggested by you.


Top
 Profile  
 
 Post subject: Re: Problems with samsung-tools
PostPosted: 22/05/2010, 11:04 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
The old 'samsung-scripts' used to install a global configuration file for keybinding, which was of course removed when the package was uninstalled.
But, if an user changed the default assigned keys, a new user configuration file was created in the user's home overriding the global one, and this new configuration file is not removed when the 'samsung-scripts' is uninstalled.
Well, I'm glad you found the cause of the problem and fixed it. :)

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: Problems with samsung-tools
PostPosted: 15/06/2010, 22:55 
Newbie
Newbie

Joined: 12/06/2010, 21:05
Posts: 2
Hi,

i'm using debian 5 and have installed samsung tools but i can bring up samsung tools to work only when i change the default python from 2.5 to 2.6 this is not good !

when i will start "system-service.py" under default config with python2.5 then come the following error message


samsung-tools/backends/system/backlight.py:80: Warning: 'with' will become a reserved keyword in Python 2.6
Traceback (most recent call last):
File "./system-service.py", line 31, in <module>
from backends.system.backlight import Backlight
File "/home/us/test/samsung-tools/backends/system/backlight.py", line 80
with open(ESDM_PATH_BACKLIGHT, 'r') as file:
^
SyntaxError: invalid syntax


Top
 Profile  
 
 Post subject: Re: Problems with samsung-tools
PostPosted: 17/06/2010, 14:57 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
Can you please try the most recent version from the bzr branch?
The problem should be fixed now.

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: Problems with samsung-tools
PostPosted: 21/06/2010, 15:09 
Newbie
Newbie

Joined: 12/06/2010, 21:05
Posts: 2
I have fixed the Problems under Debian and solved the Init.d Problem...
In 2 releases now it works... inkl patching the kernel release FN Function...

The Deb. Packages you can Download at http://www.pleural.de/info/Kostenloses- ... puter.html

this is full working on debian 5 inkl init.d FN Key and other problems fixed...


Top
 Profile  
 
 Post subject: Re: Problems with samsung-tools
PostPosted: 23/06/2010, 18:20 
Newbie
Newbie

Joined: 23/06/2010, 18:08
Posts: 2
Hello, voRIa.

I got a problem with Fn keys on my N220 netbook. I've installed samsung-tools and even updated some linux-kernel stuff from your repository, but Fn keys still don't work well. For example, Fn+Up/Down, Fn+F5 and some other combinations don't work.

Sorry if I'm too nooby, it's my first linux at all.

Here's my system info. Do you need more information to correctly define what's the problem?

Thanx

Code:
***:~$ sudo dmidecode -s system-product-name
[sudo] password for ***:
N150/N210/N220             
***:~$ uname -a
Linux netbook 2.6.32-22-generic #37~ppa1~loms~lucid-Ubuntu SMP Fri Jun 4 20:01:26 UTC 2010 i686 GNU/Linux
***:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011]
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
05:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354]


Top
 Profile  
 
 Post subject: Re: Problems with samsung-tools
PostPosted: 23/06/2010, 18:37 
Newbie
Newbie

Joined: 23/06/2010, 18:08
Posts: 2
UPD
well, i did "udate & upgrade" and all Fn key work fine BUT Fn+up/down still don't work! what to do?


Top
 Profile  
 
 Post subject: Re: Problems with samsung-tools
PostPosted: 30/06/2010, 15:08 
Administrator
Administrator
User avatar

Joined: 12/02/2009, 18:08
Posts: 1377
Location: Italy
only4reg wrote:
UPD
well, i did "udate & upgrade" and all Fn key work fine BUT Fn+up/down still don't work! what to do?

Make sure the package 'samsung-backlight' is installed.
If it's not, install it, reboot and the FN brightness keys should work. ;)

_________________
Please consider a little donation to keep the 'Linux On My Samsung' project up and running. Thank you!


Top
 Profile  
 
 Post subject: Re: Problems with samsung-tools
PostPosted: 18/10/2010, 2:09 
Newbie
Newbie

Joined: 17/10/2010, 14:31
Posts: 3
OphiuchuS wrote:
I've got the same problem on a N140 and Lucid. Without samsung-backlight the brightness wouldn't change at all, after installing the brightness package I only need to tip on the arrow key once and the brightness goes down by itself to the bottom and vice versa. So I only can put the brighness to min or max, but nothing inbetween :-|


for me, under NC10 Xubuntu (xfce4) I had the same problem but I managed to fix it as follows:

1 disabled the xfce4 power manager
2 installed the gnome power manager

and it worked. It seems that the xfce power manager in lucid has a problem. go figure why...

PS: no need to install samsung-backlight if your bios is OK


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ]  Go to page Previous  1, 2

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net & kodeki